{"product_id":"sg-plus-high-gloss-concrete-and-paver-sealer-wet-look-acrylic-water-based-1-gal","title":"SG plus High Gloss Concrete and Paver Sealer, Wet Look, Acrylic Water Based, 1 Gal","description":"Fast Dry Time: Ready for a second coat in just 1 hour — way quicker than most solvent-based sealers.  DIY Friendly: No need for fancy gear — just grab a sprayer or roller and go. Easy enough for first-timers.  No Harsh Odors: Low-VOC and low-odor formula means no respirators required. No stinky mess.  Beautiful High Gloss Wet Look Finish: Brings out the natural colors in your pavers or concrete for that fresh, glossy look.  Tough Protection: Fights off stains, oil, dirt, UV rays, and water so your surfaces stay looking great.  COLD WEATHER WARNING: Do not apply if surface temperature is expected to be below 50° for 48 hours before \u0026amp; after application. ENHANCE the life and beauty of your surface (wet look) and a high gloss finish for 2-4 years before the need to reseal (depending on your environment).  GREAT COVERAGE RATE: 250-400 square feet per gallon, per coat. You will save money and time by reducing maintenance when you seal with DOMINATOR SG+.\u003cbr\u003eDOMINATOR SG+ is the go-to sealer if you want your pavers or decorative concrete to pop with that clean, High glossy, wet look — without needing to call in the pros. This water-based sealer is made for real-life projects, whether you're sealing a fresh patio or reviving an older driveway. It’s tough, looks amazing, and makes your hard work shine. One of the best things? It dries in just 1 hour — that’s up to 3 hours faster than typical solvent-based sealers. That means less waiting around and more time actually enjoying your space. You can even knock out two coats in one day, no problem. Plus, since it’s low in VOCs (that’s the stinky stuff in a lot of sealers), you don’t need to wear a heavy-duty mask while applying it. Whether you're a seasoned DIYer or just trying this out for the first time, DOMINATOR SG+ is easy to use and gives results you’ll be proud of. COLD WEATHER WARNING: Do not apply if surface temperature is expected to be below 50° for 48 hours before and after application. Give yourself the gift of outstanding curb appeal with DOMINATOR Paver Sealers. They enhance the life and beauty of your pavers or decorative concrete. There are 2 gloss levels to choose from; low gloss (LG+) and high gloss (SG+). Protect against oil stains and other stains with incredible UV protection and low slip potential. DOMINATOR film forming sealer is breathable with no harsh odors and Low VOC's. Your money goes farther with this product with our amazing coverage rate up to 400 square feet per gallon, per coat, and 2-4 years before resealing. You will save money and time by reducing maintenance when you seal with DOMINATOR Paver Sealer. If you have stone or clay pavers, check out DOMINATOR STONE+ GLOSS for the same superior performance, but specifically formulated for your surface. EASY SPRAY ON APPLICATION: Sealing with DOMINATOR SG+ paver sealer is quick and easy. Application guide is included with every purchase and application videos are available on our website. DOMINATOR sealers have an incredibly fast dry time between coats (1 hour) making it an easy one-day project, unlike most solvent based sealers. One common question that both DIYer's and contractors alike ask is: \"How much sealer should I apply?\" The porosity of your pavers is critical to the answer. Think of this as the \"sponge factor.\" The more porous the paver, the more liquid or sealer it will absorb. The first step in figuring out how much sealer you need is determining the porosity of the paver from the start of your project. Generally, the densest surfaces don't accept much liquid. On the other hand, very porous surfaces will quickly soak up water. Is the surface you want to seal DENSE or POROUS? Easy Porosity Test 1. Make sure your pavers are clean and dry. 2.Drip a small amount of water onto your paver or surface. (A teaspoon, water dropper, or a steady hand with a water bottle will do the trick!) 3. Count how long it takes for the drop of water to be absorbed by the paver. Absorbed in 0-3 seconds = EXTREMELY POROUS Absorbed in more than 8 seconds = EXTREMELY DENSE Generally, apply 2 coats of sealer to POROUS surfaces. You may need to apply more for very porous surfaces. Apply only 1 coat of sealer to DENSE surfaces. DO NOT OVER APPLY. Additionally, we recommend applying a texture additive such as Diamond Grit in the final coat to increase traction on particularly smooth surfaces or areas prone to slipping, like pool decks, sloped areas or stairs. This product will cover 400 square feet per gallon on DENSE surfaces. You'll need more product for more POROUS surfaces.","brand":"Royal Prints Electronics and Machinery ","offers":[{"title":"Highgloss \/ 1Gal","offer_id":47643041071357,"sku":"d8b65b2f-9e07-4905-99b4-94aadd487da1","price":664.9,"currency_code":"TTD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0815\/2409\/7277\/files\/13060919c3b12360e2007ea31e670999.jpg?v=1780529569","url":"https:\/\/royalprintselectronicsandmachinery.com\/products\/sg-plus-high-gloss-concrete-and-paver-sealer-wet-look-acrylic-water-based-1-gal","provider":"Royal Prints Electronics and Machinery ","version":"1.0","type":"link"}