15“X15" High Pressure Heat Press Machine for T Shirts, Digital Industrial Sublimation Printer for Heat Transfer Vinyl
15“X15" High Pressure Heat Press Machine for T Shirts, Digital Industrial Sublimation Printer for Heat Transfer Vinyl
Couldn't load pickup availability
- Heat Platen Size: 15" X 15" Non-Stick Coated Heat Platen; Voltage: 110V; Power: 1400 W.;Temperature Range: 0 - 455.
- After-sale Protection: Lifetime Warranty on the Heating Element. 1 Year Warranty on the Heat Press.
- The Lower Platen has not pull out feature and it has Additional Room Underneath the Heat Press: To be able to thread the t-shirt onto the lower platen. Allowing for pressure and transfer to be applied only onto one side of the shirt.
- The Automatic Floatation Feature: Automatically adjusts the top platen to apply even pressure on uneven or thicker substrate items.
- Secondary Bottom Board Handle and Lower Pad Cover: The handle on bottom board will provide the added support for easy to use your heat press,make sure you have full control of your machine. The cover can be keep the bottom pad clean and effective prevention of the lower pad sliding when load and unload T shirt.
- Upgraded Time/Temperature Gauge: When the temperature reaches the set temperature, the machine will sound 5 beeps to remind you.
How to check the temperature on your heat press?.
An infrared gun is good for generalized temperatures but can often read 30-50°F due to angles, distance, reflections, so infrared tend to provide wide varying results. Another factor is checking surface temperature when it is heating, the surface temperature of the platen is also being cooled by air around it, but at this time the display shows the temperature numbers is from the inside heating tube.
As we know the proper temperature can make heating transfer successful------not necessarily the exact temperature of the platen which is more difficult to check. Although this process will still have some inconsistent readings, if you only have an infrared gun, I suggest you do the following steps to provide the accurate reading.
1. Set your press to a temperature to check, such as 350°F and allow the press to sit for a few minutes (5-10 minutes) to stabilize the temperature.
While heat presses will turn themselves on and off to maintain temperature, this is normal. Just like your home oven, the heating elements will continue to turn themselves on and off to maintain temperature.
2.Then press with medium pressure for about 60 seconds, and lift it up and get your reading quickly, Check at least 5 points or more across the platen and average temperatures.
3. Again, we do not feel this will have consistent results, but if you only have an infrared gun to check the temperature, this is usually a better test than pointing the infrared directly at the platen.
Please note that while a heat press is closed and in operation, it is normal for the temperature to decrease a few degrees, because the heat transfers into the garment, pad, and lower platen.
Product Availabily
Product Availabily
PRE-ORDER: THESE ARE ITEMS THAT ARE NOT AVAILABLE AND/OR ARE CURRENTLY SOLD-OUT FROM OUR PHYSICAL/ONLINE SHOP.
Pre-order or back-order is placing orders in advance which requires a down payment from a client interested in procuring the said item/product.
Please make sure you have read and understood all the conditions written here before submitting your Orders.
NOT ALL ITEM(S) ARE STOCKED PLEASE QUERY BEFORE PURCHASING.
Pre-Order Policy
Pre-Order Policy
PRE-ORDER ITEMS ARE NOT ON HAND AND THEREFORE, HAVE TO WAIT AROUND 6 TO 8 WEEKS TO RECEIVE THE ITEMS.
BEFORE ORDERING, PLEASE READ THE RULES & REGULATIONS BELOW:
1. Pre orders require payment to be made at checkout.
2. Please note that due to the nature of pre-order items, we will not be accepting cancellations. Cancellation of orders is not allowed once the “Order Form” has been submitted and paid nor could it be exchanged for other items. All pre-orders made are considered as sold.
3. We cannot estimate or guarantee a specific ship date so we cannot guarantee products will be available in 6 weeks. We will ship orders the moment they are available.
4.Sometimes the ordered items will arrive later than 8 weeks due to several factors (eg: customs)
5. Please do not order if you are unable to wait.
6. If you combine in-stock and pre-ordered items, ALL items will be shipped at once when all pre-ordered items are available.
7. Once you place an order with us, it means that you are willing to accept these terms & conditions
8. Pre-orders are non-transferable. All orders made shall ship directly to the person and address specified in the order form. We will not entertain such requests to protect the privacy and security of our customers.
9. Once the products have landed and received by our team. You will then be informed via email and our social media platforms. We will immediately have all your orders packed in the next 24 Hours and schedule it for shipment. In the case of lost items during shipment we shall refund in full the amount that you have paid and shall offer a discount on your next possible purchase from us.
Merchandising tips
Merchandising tips
Share
